Door Handle Replacement
It's worth it to replace door handles if you aren't happy with the way they look or if they are difficult to use. Installing a new door handle is easy if you have patience.
The majority of modern door handles come with cover plates that hide the screws to create a stylish appearance. However, you'll need to attach them separately if your new handle does not have them attached already.
Remove the old Handle
The door handle isn't only a decorative addition to your home, but it's also an important safety feature that lets you to lock and unlock the door. As time passes, the door handle may start to lose its grip or feel a bit loose. It may be beginning to appear old and worn. This is a clear indication that it's time to replace your door handle.
If your door handle is becoming difficult to use, it could be time to replace it. This is a serious problem since you won't be in a position to lock or unlock the door, which could put you and your family at risk.
It is also an excellent idea to replace the handle on your door if it is damaged or broken. A damaged or broken door handle is dangerous, especially for elderly or children members who may struggle to open it. They may get trapped. It's easy to replace a damaged handle on the door.
The majority of modern door handles are standard size and therefore should fit any door. If you are not sure if the new door handle you are buying will work, remove the old one and measure the holes in its housing. This will allow you to buy the right door handle.
It is easiest to take off the old door handle by taking it off from the door. This is typically done with the screw driver. Some door handles come with a cover plate which hides the screws that mount them. You'll need to remove this to get to the screws. Once you've removed your old handle, take a note of how the spindle is attached so that you can align it when you fit the new one.
You can also remove the door handle by depressing the latch mechanism. You can make use of a screwdriver to take off the door handle. However, you'll need to locate the small latch, which is located on the edge cut piece. After removing the latch, unscrew the handle and the strike plate. Then, remove the latch from the edge of the door.
Removal of the Strike Plate
You'll need to replace your latch plate after replacing the handle. It's the plate that holds the hole through which the door's latch hooks in when the door closes. The box that the new handles arrive in will have two different latch plates - either a rectangular or circular (see the diagram above detailing door handle parts). If you have an old rectangular latch plate, replace it with an oval one. This will allow the latch to be able to hook into the strike plate, making the handle easier to use.
The first step is to remove the screw that holds the latch plate that was previously in place. The screws can be very tight, and will require some force to loosen. If you are able, it could be beneficial to have another person assist with this part.
The latch plate should lift itself out of the door after the screws have been removed. If it is stuck or doesn't move, use a small nail file to scrape the edges of the latch plate. This can sometimes open the plate.
You can now move on to creating the new door strike plate for installation. Screw the latch plate into the doorjamb using the wood screws that came with the new handles. Do not tighten the screws too much as this could cause damage to the strike plate.
If you're not sure whether the latch plate is in its proper position, close and open the door to check whether it locks and closes properly. If not then you'll have to adjust the strike plate either up or down, or even forward or back until the door closes and latches correctly.
If the door continues to move or jiggles, then you may need to increase the size of your latch hole on the strike plate. This is more prevalent with older doors, but could be due to wear and tear, hinge mortises that are too shallow or are not sized correctly for the latch, or due to damaged or broken strike plate that is damaged or broken. If this is the situation, use a metal filing instead of a chisel or hammer to adjust the strike plate.
Removing the Latch
The latch is the angled piece of metal that slides between the hole on the inside edge of your door. The latch moves forward when you turn the handle. It also connects to an opening in the door frame to keep the door closed. If your door wiggles when you close it, replacing the latch may be all you need to fix it.
The screws that support the door latch are difficult to see, but you can usually insert a screwdriver into a small hole in the trim plate and then pry the latch off. After removing the trim plate, you will be able to pull off the latch and the bolts that hold it in place and the spindle.
If the latch won't release it is suggested to use the clip of a paper or tool to release it from the handle mechanism. Place the item in the recessed latch slot and gently twist or jiggle it until you feel the latch and handle begin to separate. You may need to repeat this several times before the latch comes loose enough to pull out.
After the old latch is removed it should be possible to slide the new latch into the slot without any issues. Make use of the new screws to attach the latch to the strike plate or door frame. Make sure it's correctly placed in the slot, and aligned with the screw chambers.
Before installing the new handle, be sure to measure your existing backset (the distance from the center of the big hole on the front of the door to the edge). Also, make sure that the latch size on the new handle is in line with the measurement of your existing handle.
upvc replacement door handles repairmywindowsanddoors 'll require a new cylinder for your lock if replacing the latch and handle or if your current one is damaged. If you are not changing locks the new lock should fit into your existing recess and also work with your current keys. Be sure to choose the latch with rectangular cover plates that match the handles you have.
Take off the cover plate
Door handles may begin to look shabby over time However, if you replace them with a contemporary lever-on-rose design, it's a simple and quick DIY project and decorating idea that can improve the overall appearance of your home. You can purchase complete sets that include matching escutcheons as well as privacy adaptor kits.
To replace the door handle inside, remove the cover plate (or rose), which covers the screws and mechanism. Utilize a flathead to take off the cover plate. It may have an opening along one side or be secured by a pin.
Remove the screw that is holding the interior handle and put it aside after the cover plate is removed. Take off the screws that hold both the outer and inner plates. You can loosen them with the help of a Philips Screwdriver. Remove the plates that hold the inner plate and latch from the door. Set them aside.
Most doors have a gap between the jamb of the door and the inside edge of the frame that allows for a handle, but not all have. If yours does not, you will need to drill a hole in the door. It's the same procedure as opening a locked door, but you will have to be extra careful not to harm the door or frame.
After drilling the holes, you'll need to install new screws for the door knob. Purchase the same dimensions as your old screws to ensure that you don't get a handle too tight or loose. Installing a new strike rod and latch is also required. They aren't included in most door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent alternative if you're in search of a high-quality interior door handle replacement set. It's a factory-fit product and has received hundreds five-star reviews. It's a great option to replace worn or damaged door hardware on your Chevy.